Driver Updates & Downloads

C-Media Xear 3D Advanced Program; C-Media AC97 UDA driver; C-Media AC97 Audio Device


Ver UDA046_build02  Release Date:  09/03/2004 -Version information:
UDA driver   : v5.12.01.0046 Logo
Support Southbridge: sis7012,VIA3059,ICH2,ICH4,ICH6,ALi1563,ALi1535D+,nVidia MCP,T,ATI150,300, etc for Windows
VXD driver   : v0324
NT4 driver   : v4.10.00.002Ba for ICH2,ICH4,SIS7012,VIA8233
               V4.10.00.000Bb for ALi5451 , sis7018
Configuration: v.1.0.41.16
Play3D Demo  : v004
Setup program: v2.052

2002/11/15
1. Add Logo mechanism for specific company.
2. Keep Speaker Volume when switch RoomSize
3. wave playback buffer account cant use 8 otherwise will failed on W2K..
4. fix bug:sometimes cant move LF speaker when on samll roomsize.

006 2002/11/08 release version :
1.change Image of 3D Demo Page/Multi Page
2.change KTV Icon
3.Userdef ComboBox in 3D Demo Page only show file name not full path
4.version tooltip will show when enter titlebar
5.avoid close application when press enter/esc
6.music demo on multi page will playback continue unless press stop.
7.3D demo page only support up to 2 channel wave file
8.extend wave playback buffer to 8
9.modify stop wave playback mechanism:
 when playback to end,stop will execute only if all write out buffer be playback.



\\UDA 5.12.01.0046
---------------------------
1. Mic cant record full scale signal when wake-up from S3 (a portion of 9739).

\\UDA 5.12.01.0045
---------------------------
1. Max 33 streams for wave-out supported.
2. Fix bug that S/PDIF-OUT disappear when disable S/PDIF-IN (9761+).
3. Fix rear-out swapped problem on ATi-IXP.

\\UDA 5.12.01.0044
---------------------------
1. Fix VREF control bug on no-sharing jackconfig.
2. Support GPIO on ATi-IXP.
3. Support TvTuner/Aux volume control re-naming.

\\UDA 5.12.01.0043
---------------------------
1. nVidia CK8S/MCPS south-bridge supported.
2. ATi IXP-150/200/250/300 south-bridge supported.
3. Improve GPIO-headphone behavior.
4. Fix C/B silence when drag the master-balance slider left (or right) issue.

\\UDA 5.12.01.0042
---------------------------
1. Fix the bug that jack sense cannot pass HCT test.
2. Resolve GPIO hang problem on 9761A codec.
3. Improve capture cannot pass AP test issue.
4. Fix magic voice problem.
5. Add new func that support jack sense to mute mic.
6. Fix 5+2 jackconfig problem on 9780 codec.
7. Fix manual S-Bracket mode bug issue.

\\UDA 5.12.01.0041
---------------------------
1. Improve pop noise at back-out during startup.
2. Fix the problem that Sound-environment when muting the wave volume issue.
3. Fix BSOD when S/PDIF-out with PCM-out @ 8-CH issue.
4. Fix mutex mechanism for playback issue.
5. Support RADIO/AUX volume control re-naming
6. Support LINE-IN/VIDEO volume control re-naming

\\UDA 5.12.01.0040
---------------------------
1. CMI-9780 (8-CH) supported.
2. 8-CH DMA supported for ICH-4/5, VIA-3059, and SiS-7012.
3. New format for WMA Pro S/PDIF.
4. Mic effect with magic voice supported.
4. Improve stereo mic function.
5. Fix SRC crashed when multi-stream & multi-rate issue.

\\UDA 5.12.01.0039
---------------------------
1. improve WinDVD playback with HyperThread mode
2. fix GPIO interrupt acknowledgement issue



Download...

Download...

Download...

Download...

Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Download...

Broadcom Ethernet Driver
Download...

Broadcom Ethernet Driver
Download...

ATI RADEON, ALL-IN-WONDER, ETC.
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

AMD AHCI Compatible RAID Controller
ATI All-in-Wonder HD
RadeonTM display driver
HydraVisionTM for Windows XP, Vista and Windows 7
WDM Driver Install Bundle
Southbridge/IXP Driver
CatalystTM Control Center


Caution: The CatalystTM Control Center requires that the Microsoft .NET Framework SP1 be installed. Without .NET SP1 installed, the CatalystTM Control Center will not launch properly and the user will see an error message.


AMD Desktop Product Family Support:
ATI RadeonTM HD 5800 Series
ATI RadeonTM HD 4600 Series
ATI RadeonTM HD 5700 Series
ATI RadeonTM HD 4550 Series
Etc.
Download...

AMD AHCI Compatible RAID Controller
ATI All-in-Wonder HD
RadeonTM display driver
HydraVisionTM for Windows XP, Vista and Windows 7
WDM Driver Install Bundle
Southbridge/IXP Driver
CatalystTM Control Center


Caution: The CatalystTM Control Center requires that the Microsoft .NET Framework SP1 be installed. Without .NET SP1 installed, the CatalystTM Control Center will not launch properly and the user will see an error message.


AMD Desktop Product Family Support:
ATI RadeonTM HD 5800 Series
ATI RadeonTM HD 4600 Series
ATI RadeonTM HD 5700 Series
ATI RadeonTM HD 4550 Series
Etc.
Download...

Download...

Intel(R) 82552 10/100 Network Connection
Intel(R) 82567V-3 Gigabit Network Connection
This Zip* file contains all of the Intel® Ethernet network drivers and software for currently supported versions of Windows*, Linux* and FreeBSD* for most Intel Ethernet adapters as found on the CD that accompanies Intel® Ethernet Adapters.

This release includes software and drivers for Intel(R) PRO/100,Intel(R) Gigabit, and Intel(R) 10GbE network adapters and integrated network connections.

Intel(R) I/O Acceleration Technology

Intel I/O Acceleration Technology (Intel(R) I/OAT) is a new Intel platform network technology that accelerates, optimizes and seamlessly  scales enterprise servers on Microsoft Windows Server* and Linux* operating systems. Acceleration moves networking data to applications faster. Optimization allows you to increase the load on your servers without increasing power consumption. Seamless multiple port scaling gives you increased networking throughput from teaming along with reliable server and application availability.

Intel I/OAT requires the following to operate on Microsoft Windows

Operating Systems:

- A server chipset and BIOS that are Intel I/OAT capable
- Microsoft Windows Server 2008 or
- Microsoft Windows Server 2003 with Service Pack 1 or 2 installed
- The Scalable Networking Pack from Microsoft (this is installed as part  of Service Pack 2 or Windows Server 2008)
- An adapter or network connection that is Intel I/OAT-capable
- The RSS advanced setting must be enabled
 - Under TCP/IP Offloading Options, both Offload Receive IP Checksum and Offload Receive TCP Checksum must be enabled.

 Supported products:
Intel(R) PRO/1000 PT Server Adapter
 Intel(R) PRO/1000 PT Desktop Adapter
 Intel(R) PRO/1000 PT Network Connection
 Intel(R) PRO/1000 PT Dual Port Server Adapter
 Intel(R) PRO/1000 PT Dual Port Network Connection
 Intel(R) PRO/1000 PF Server Adapter
 Intel(R) PRO/1000 PF Network Connection
 Intel(R) PRO/1000 PF Dual Port Server Adapter
 Intel(R) PRO/1000 PB Server Connection
 Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
 Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
 Intel(R) PRO/1000 PL Network Connection
 Intel(R) PRO/1000 PT Quad Port Server Adapter


Adapters based on the Intel(R) 82542, 82573V/E, 82562V, 82562GT and 82566 controllers do not support Jumbo Frames.  These correspond to the following product names:
 Intel(R) PRO/1000 Gigabit Server Adapter
 Intel(R) PRO/1000 PM Network Connection
 Intel(R) 82562V 10/100 Network Connection
 Intel(R) 82562GT 10/100 Network Connection
 Intel(R) 82566DM Gigabit Network Connection
 Intel(R) 82566DC Gigabit Network Connection


The Intel PRO/1000 PL Network Connection supports jumbo frames in Microsoft* Windows* operating systems only when Intel(R) PROSet for Windows Device Manager is installed.


Download...

Alps Device in Firmware Upgrade; Bluetooth 2.0.USB Adapter DFU; TDK Bluetooth USB Firmware Upgrade Device; Broadcom Bluetooth Firmware Upgrade Device;

Logitech SetPoint utolity is the software used to install and control Logitech mices (!!). It contains drivers and software enabling you to take full advantage of your mouse.

NOTES:
1.Close all open applications and documents before installing this software.
2.If you have an older version of SetPoint installed on your system, it will be removed while installing this version of SetPoint and your system will reboot during the installation process.
3.Settings from previous versions of SetPoint 4.x will not be preserved when you upgrade SetPoint. Settings from SetPoint 5.x will be preserved.
4.If you dont see a picture of the device you are configuring in this latest version of SetPoint, check to see that you are connected to the internet. The device image should download automatically in the background.
5.If your mouse or keyboard is connected to the PS/2 port and you want it to be recognized by SetPoint, you will need to activate the PS/2 driver. To do this, open SetPoint, select the Tools tab, and click the 'Install PS/2 Driver' button. If the button is grayed out, it means a PS/2 driver is already installed.

Changes from earlier versions of SetPoint:

The download size has been reduced by approximately 60%. This has been achieved by streamlining the code and removing device pictures from the download package.
SetPoint will automatically download pictures in the background for devices that are connected to your system.
This version of SetPoint includes the control panels for standard mice and keyboards (previously supported in SetPoint 4.x) and gaming mice (previously supported in SetPoint 5.x). This reduces duplication of system components, resulting in a smaller overall installation size.
The SetPoint control panel for standard mice and keyboards has been updated with a new appearance.
Numerous bug fixes and stability enhancements have been made in this version of SetPoint
Download...

Alps Device in Firmware Upgrade; Bluetooth 2.0.USB Adapter DFU; TDK Bluetooth USB Firmware Upgrade Device; Broadcom Bluetooth Firmware Upgrade Device;

Logitech SetPoint utolity is the software used to install and control Logitech mices (!!). It contains drivers and software enabling you to take full advantage of your mouse.

NOTES:
1.Close all open applications and documents before installing this software.
2.If you have an older version of SetPoint installed on your system, it will be removed while installing this version of SetPoint and your system will reboot during the installation process.
3.Settings from previous versions of SetPoint 4.x will not be preserved when you upgrade SetPoint. Settings from SetPoint 5.x will be preserved.
4.If you dont see a picture of the device you are configuring in this latest version of SetPoint, check to see that you are connected to the internet. The device image should download automatically in the background.
5.If your mouse or keyboard is connected to the PS/2 port and you want it to be recognized by SetPoint, you will need to activate the PS/2 driver. To do this, open SetPoint, select the Tools tab, and click the 'Install PS/2 Driver' button. If the button is grayed out, it means a PS/2 driver is already installed.

Changes from earlier versions of SetPoint:

The download size has been reduced by approximately 60%. This has been achieved by streamlining the code and removing device pictures from the download package.
SetPoint will automatically download pictures in the background for devices that are connected to your system.
This version of SetPoint includes the control panels for standard mice and keyboards (previously supported in SetPoint 4.x) and gaming mice (previously supported in SetPoint 5.x). This reduces duplication of system components, resulting in a smaller overall installation size.
The SetPoint control panel for standard mice and keyboards has been updated with a new appearance.
Numerous bug fixes and stability enhancements have been made in this version of SetPoint
Download...

Download...