Driver Updates & Downloads

C-Media AC97 Audio Device
Download...

Audio / Sound Chipset
Download...

Belkin USB Peripheral Switch
Download...

Logitech SetPoint 3.15 32bit Driver
Download...

YAMAHA AC-XG Audio Device
Download...

NVIDIA Quadro Professional Driver.

This package supports the following driver models:

• NVIDIA Quadro FX 3450/4000 SDI
• NVIDIA Quadro FX 1400
• NVIDIA Quadro FX 550
• NVIDIA Quadro FX 540
• NVIDIA Quadro NVS 285
• NVIDIA Quadro FX 4500
• NVIDIA Quadro FX 3500
• NVIDIA Quadro FX 5600
• NVIDIA Quadro FX 4600
• NVIDIA Quadro FX 570
• NVIDIA Quadro FX 1700
• NVIDIA Quadro NVS 290

HARDWARE PRODUCT HP MODEL(S):
HP xw4400 Workstation: All Models
HP xw4550 Workstation: All Models
HP xw4600 Workstation: All Models
HP xw6400 Workstation: All Models
HP xw6600 Workstation: All Models
HP xw8400 Workstation: All Models
HP xw8600 Workstation: All Models
HP xw9400 Workstation: All Models
HP Z400 Workstation: All Models
HP Z600 Workstation: All Models
HP Z800 Workstation: All Models
Etc.

DEVICES SUPPORTED:
NVIDIA Quadro FX 1400
NVIDIA Quadro FX 1500
NVIDIA Quadro FX 1700
NVIDIA Quadro FX 1800
NVIDIA Quadro FX 3400
NVIDIA Quadro FX 3450
NVIDIA Quadro FX 3500
NVIDIA Quadro FX 370
NVIDIA Quadro FX 3700
NVIDIA Quadro FX 380
NVIDIA Quadro FX 3800
NVIDIA Quadro FX 4500
NVIDIA Quadro FX 4600
NVIDIA Quadro FX 4800
NVIDIA Quadro FX 540
NVIDIA Quadro FX 5500
NVIDIA Quadro FX 560
NVIDIA Quadro FX 5600
NVIDIA Quadro FX 570
NVIDIA Quadro FX 580
NVIDIA Quadro FX 5800
NVIDIA Quadro NVS 285 128MB
NVIDIA Quadro NVS 285 64MB-TC
NVIDIA Quadro NVS 290
NVIDIA Quadro NVS 290 x1
NVIDIA Quadro NVS 295
NVIDIA Quadro NVS 440
NVIDIA Quadro NVS 450
NVIDIA Quadro NVS 450 PCI Bridge
NVIDIA Tesla C1060
Etc.




Download...

SMC Wireless LAN Driver
Download...

Realtek RTL
Download...

HP Image Zone Express (274.78 MB)
Download...

VIA CPU to AGP Controller
Download...

Wia390
Download...

Wia390
Download...

Netgear CG814 USB
Download...

Serial ATA Drivers version
Download...

Belkin USB Peripheral Switch
Download...

C-Media Xear 3D Advanced Program; C-Media AC97 UDA driver; C-Media AC97 Audio Device


Ver UDA046_build02  Release Date:  09/03/2004 -Version information:
UDA driver   : v5.12.01.0046 Logo
Support Southbridge: sis7012,VIA3059,ICH2,ICH4,ICH6,ALi1563,ALi1535D+,nVidia MCP,T,ATI150,300, etc for Windows
VXD driver   : v0324
NT4 driver   : v4.10.00.002Ba for ICH2,ICH4,SIS7012,VIA8233
               V4.10.00.000Bb for ALi5451 , sis7018
Configuration: v.1.0.41.16
Play3D Demo  : v004
Setup program: v2.052

2002/11/15
1. Add Logo mechanism for specific company.
2. Keep Speaker Volume when switch RoomSize
3. wave playback buffer account cant use 8 otherwise will failed on W2K..
4. fix bug:sometimes cant move LF speaker when on samll roomsize.

006 2002/11/08 release version :
1.change Image of 3D Demo Page/Multi Page
2.change KTV Icon
3.Userdef ComboBox in 3D Demo Page only show file name not full path
4.version tooltip will show when enter titlebar
5.avoid close application when press enter/esc
6.music demo on multi page will playback continue unless press stop.
7.3D demo page only support up to 2 channel wave file
8.extend wave playback buffer to 8
9.modify stop wave playback mechanism:
 when playback to end,stop will execute only if all write out buffer be playback.



\\UDA 5.12.01.0046
---------------------------
1. Mic cant record full scale signal when wake-up from S3 (a portion of 9739).

\\UDA 5.12.01.0045
---------------------------
1. Max 33 streams for wave-out supported.
2. Fix bug that S/PDIF-OUT disappear when disable S/PDIF-IN (9761+).
3. Fix rear-out swapped problem on ATi-IXP.

\\UDA 5.12.01.0044
---------------------------
1. Fix VREF control bug on no-sharing jackconfig.
2. Support GPIO on ATi-IXP.
3. Support TvTuner/Aux volume control re-naming.

\\UDA 5.12.01.0043
---------------------------
1. nVidia CK8S/MCPS south-bridge supported.
2. ATi IXP-150/200/250/300 south-bridge supported.
3. Improve GPIO-headphone behavior.
4. Fix C/B silence when drag the master-balance slider left (or right) issue.

\\UDA 5.12.01.0042
---------------------------
1. Fix the bug that jack sense cannot pass HCT test.
2. Resolve GPIO hang problem on 9761A codec.
3. Improve capture cannot pass AP test issue.
4. Fix magic voice problem.
5. Add new func that support jack sense to mute mic.
6. Fix 5+2 jackconfig problem on 9780 codec.
7. Fix manual S-Bracket mode bug issue.

\\UDA 5.12.01.0041
---------------------------
1. Improve pop noise at back-out during startup.
2. Fix the problem that Sound-environment when muting the wave volume issue.
3. Fix BSOD when S/PDIF-out with PCM-out @ 8-CH issue.
4. Fix mutex mechanism for playback issue.
5. Support RADIO/AUX volume control re-naming
6. Support LINE-IN/VIDEO volume control re-naming

\\UDA 5.12.01.0040
---------------------------
1. CMI-9780 (8-CH) supported.
2. 8-CH DMA supported for ICH-4/5, VIA-3059, and SiS-7012.
3. New format for WMA Pro S/PDIF.
4. Mic effect with magic voice supported.
4. Improve stereo mic function.
5. Fix SRC crashed when multi-stream & multi-rate issue.

\\UDA 5.12.01.0039
---------------------------
1. improve WinDVD playback with HyperThread mode
2. fix GPIO interrupt acknowledgement issue



Download...

Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Download...

ATI/AMDs All-in-Wonder PCI-E Edition family
Download...

Alps Device in Firmware Upgrade; Bluetooth 2.0.USB Adapter DFU; TDK Bluetooth USB Firmware Upgrade Device; Broadcom Bluetooth Firmware Upgrade Device;

Logitech SetPoint utolity is the software used to install and control Logitech mices (!!). It contains drivers and software enabling you to take full advantage of your mouse.

NOTES:
1.Close all open applications and documents before installing this software.
2.If you have an older version of SetPoint installed on your system, it will be removed while installing this version of SetPoint and your system will reboot during the installation process.
3.Settings from previous versions of SetPoint 4.x will not be preserved when you upgrade SetPoint. Settings from SetPoint 5.x will be preserved.
4.If you dont see a picture of the device you are configuring in this latest version of SetPoint, check to see that you are connected to the internet. The device image should download automatically in the background.
5.If your mouse or keyboard is connected to the PS/2 port and you want it to be recognized by SetPoint, you will need to activate the PS/2 driver. To do this, open SetPoint, select the Tools tab, and click the 'Install PS/2 Driver' button. If the button is grayed out, it means a PS/2 driver is already installed.

Changes from earlier versions of SetPoint:

The download size has been reduced by approximately 60%. This has been achieved by streamlining the code and removing device pictures from the download package.
SetPoint will automatically download pictures in the background for devices that are connected to your system.
This version of SetPoint includes the control panels for standard mice and keyboards (previously supported in SetPoint 4.x) and gaming mice (previously supported in SetPoint 5.x). This reduces duplication of system components, resulting in a smaller overall installation size.
The SetPoint control panel for standard mice and keyboards has been updated with a new appearance.
Numerous bug fixes and stability enhancements have been made in this version of SetPoint
Download...

Alps Device in Firmware Upgrade; Bluetooth 2.0.USB Adapter DFU; TDK Bluetooth USB Firmware Upgrade Device; Broadcom Bluetooth Firmware Upgrade Device;

Logitech SetPoint utolity is the software used to install and control Logitech mices (!!). It contains drivers and software enabling you to take full advantage of your mouse.

NOTES:
1.Close all open applications and documents before installing this software.
2.If you have an older version of SetPoint installed on your system, it will be removed while installing this version of SetPoint and your system will reboot during the installation process.
3.Settings from previous versions of SetPoint 4.x will not be preserved when you upgrade SetPoint. Settings from SetPoint 5.x will be preserved.
4.If you dont see a picture of the device you are configuring in this latest version of SetPoint, check to see that you are connected to the internet. The device image should download automatically in the background.
5.If your mouse or keyboard is connected to the PS/2 port and you want it to be recognized by SetPoint, you will need to activate the PS/2 driver. To do this, open SetPoint, select the Tools tab, and click the 'Install PS/2 Driver' button. If the button is grayed out, it means a PS/2 driver is already installed.

Changes from earlier versions of SetPoint:

The download size has been reduced by approximately 60%. This has been achieved by streamlining the code and removing device pictures from the download package.
SetPoint will automatically download pictures in the background for devices that are connected to your system.
This version of SetPoint includes the control panels for standard mice and keyboards (previously supported in SetPoint 4.x) and gaming mice (previously supported in SetPoint 5.x). This reduces duplication of system components, resulting in a smaller overall installation size.
The SetPoint control panel for standard mice and keyboards has been updated with a new appearance.
Numerous bug fixes and stability enhancements have been made in this version of SetPoint
Download...